Type of Cable: ........................................ Twin-Core Linear Power Output: ................................ 18 W/m Section Length: .............................................. 1.0 m
The heating section is manufactured using a twin-core heating cable with a linear power output of 18 W/m and a built-in thermostat. It is designed for Pipe Freeze Protection systems to prevent pipes from freezing and being damaged during winter. The system can also be installed on valves, water meters, water supply pumps, drainage systems, shut-off mechanisms, and metal door frames where there is a risk of freezing. ST-18 heating sections are recommended for freeze protection of metal pipes.
Heating Cable Construction
Heating Conductors
Insulation (Cross-Linked Polyethylene)
Shield (Copper Wire Braid)
Outer Jacket (Heat-Resistant PVC Compound)
Technical Specifications
Supply Voltage – 220 V, 50 Hz Linear Power Output (ST-18) – 18 W/m Thermostat Switching Temperature (ON/OFF) – +3°C / +10°C Nominal Cable Dimensions – 4.33 × 6.63 mm Minimum Cable Dimensions – 4.18 × 6.43 mm Maximum Cable Dimensions – 4.48 × 6.83 mm Cold Lead Cable – PVS-VP 3×0.75 Cold Lead Length – 2.0 m Insulation – Cross-Linked Polyethylene (XLPE) Primary Shield – Tinned Copper Wires Secondary Shield – Aluminum Foil Outer Sheath – Heat-Resistant PVC Compound Climatic Version – UHL, Placement Category 3 (GOST 15150)
Properties
Warranty – 5 Years Power – 18 W Cable Length – 1.0 m Linear Power Output – 18 W/m